Power factor for lamps
According to BRE’s The essential guide to retail lighting:
The term ‘power factor’ is ‘…A measure of the phase difference between the voltage and current in an alternating current (AC) supply. For lamp types other than incandescent, the voltage and current waveforms are not exactly in phase with one another: thus the volts multiplied by the amperes in the circuit may be higher than the Watts. In such cases, the Watts represent the active power, and the volts multiplied by the amperes represent the apparent power. The power factor is the ratio of the absolute value of the active power to the apparent power. Ideally, the power factor should be as close to unity as possible. A low value of the power factor increases the current load and the energy consumption. Most high-wattage lamp circuits are designed to have a power factor greater than 0.85.’
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
- Ballast or control gear.
- Colour appearance.
- Daylight benefits in healthcare buildings.
- Daylight factor.
- Daylight lighting systems.
- Dichroic reflector.
- Discharge lamp.
- Extra-low voltage lamps.
- General lighting v task lighting.
- Illuminance.
- Lamp.
- Lamp efficacy.
- Light pollution.
- Lighting.
- Lighting energy numeric indicator LENI.
- Lighting of construction sites.
- Luminaire efficacy.
- Rights to light.
- The Future of Electricity in Domestic Buildings.
- The UK’s low-carbon future is increasingly electric.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.
UK Standard Skills Classification (SSC)
A shared framework for describing skills needs.
Social media ban consultation comes to close
CIOB urges UK Government to consider social media’s role in careers guidance in ban debate.